[Synology] Compatibility with Synology DSM Version 7
Synology has just released a DSM (7.0) blocking root access to packages.
Mono and Zappiti Server are affected by the issue, knowing that Mono is not developed by Zappiti and is needed to run Zappiti Server.
Anyone upgrading to DSM 7.0 will no longer be able to use Zappiti Server on Synology.
Please find in the link below the procedure to install Zappiti Server on Docker (compatible with DSM7) :
I will for sure try this work around when I have the Zappitti Reference when it comes out. However it would be nice to have this solved without a work around.
Thank you to take this problem seriously and came with a solution!
Wolfgang Krimmel commented
@The_Zix I have SMB1 still enabled. If I remember correctly, I had to enable it to access my videos with the Zappiti player anyways.
@Zappiti, this is great! hats-off to you guys
1. Now you guys support a great many more models of Synology (and probably any NAS capable of running docker) plus the MONO dependency.
2. Documentation is very clear and well detailed
3. Was able to move to Zappiti docker in less than 10 minutes with migration
4. I have a DS1621+ with "DSM 6.2.4-25556 Update 2" worked liked a charm on it with SMB1 still enabled.
5. Here where i think we still have an issue, I disabled SMB1 and forced no less than SMB2. Zappiti could not connect to the folder. @Wolfgang Krimmel can you confirm if you put SMB2 it is working for you on DSM6? I am not sure how @Andreas got it to work on DSM7. I thought DSM 7 disables SMB1 @Andreas did you do anything special? I am still holding off moving to DSM7 due to this.
@Zappiti what is your view on this, with this new docker would disabling SMB1 on DSM6 work?
Any feedback is great feedback.
This only works for those who have those specific Synology models, I have a 64bit DS418J and it does not work. Will there be a solution for us or should I just throw my Zappiti in the garbage?
Dear, I've followed the procedure to install Zappiti Server on Docker but docker package (64bit) is not available on my synology DS415Play (32bit).
Could you find a solution to make Zappiti video to work on my synology ?
Wolfgang, this is working with DSM7. No issues so far. Thanks to the Zappiti team for this solution.
Wolfgang Krimmel commented
Thanks Andreas! I just installed Zappiti Server on Docker on my DS1621+ (DSM 6.2.4-25556 Update 2) following this guide and it seams to work well! That's exactly what I was looking for.
Did anyone test it on DSM7? I am actually looking into updating.
Same here, Update on DSM6 is not working anymore. However they published a guide (French only) to install Zappiti on docker in DSM7: https://zappiti.uservoice.com/knowledgebase/articles/1977855-installer-zappiti-server-avec-docker-nouvelle-pro
Would be good to have a English version and future-proof way (docker repository).
Jasper Waale commented
Update 4.26.266 Video do not load/update on Synology running DSM 6.2.4-25556 update 2, you are however able to remove and remove the pointer to Beta version and then Reinstall older version
Reinier Van Haeften commented
please fix the issue with the current Zapitti server update on synology the update can't download on Synology NAS, at least make the SPK manual downloadable. lots of people can't use the software now.
I'm also still waiting for an update. Advised a few friends to update to Zappiti (I (myself) am good with it (Synology 1819+) for now, but many my friends got issues.... Some got new Synology NAS... not working ....... Some have not working software, SMB issues (SMB1 Disabled).... and so on...... So I definitely stop promoting this product to anyone I know.
All my friends went to Plex. (PS not MY kind of solution YET). But since Zapitti is not working for them, I understand them. I am on the verge to also convert.
To Zapitti develop team !!!! This is costing you customers !!!!!
The last update was from 2 months ago! How long do we have to wait to use your product?
As an integrator I have promoted Zappitti to both clients and colleagues all over the world. We have been in this situation now for over 10 months. I have clients who have effectively locked out of their library for months. I know you can downgrade but what you are left with is not great and if you also need some of the newer features you are screwed. We need regular updates on this or all the hard work promoting this great product will be for nothing.
When will it be available ?
Hey, any updates on this ?. Will Zappiti server work on DSM7 in the future. It seems that the only method for now is to downgrade back to dsm 6.2
The Samba Client should be SMB2 minimum, SMB1 has a security flaw and should not be used anymore
Since this suggestion has been merged with others, Zappit, please ensure that this one is actually the docker route. To summarize the synology users are complaining from
2. MONO issues
3. DSM 7
4. New hardware being release that is not compatible notability from models 2020 and upwards.
A docker package on docker hub would address all these and from Zappiti perspective, the same package can be used on any NAS brand from QNAP, TerraMaster, WD, Buffalo etc.
This will expand your reach.
What needs to be done, is build the zappiti image with SMB1 internally, with MONO then from an end user perspective a mapping to needs to happen between Zappiti-Server folder using your port.
I am ready to test it out for you as an Alfa release or Beta and provide you feedback
M. Truetsch commented
good idea but also other support with DSM 7.0 would be very important and urgent
Please let us all Synology users move the votes to this one
(not mine to be clear).
Going the Docker way will address most of the Synology related issues from new Hardware architecture support, to MONO, to SMB3, Folder Backup etc
tres bonne idée