[RC] Programming Buttons of Another RC

You must put the remote control of the device to program at 15cm at least from the Zappiti remote control. The 2 devices must not be too close to each other because if they are too close it doesn't work.

Programming buttons:


1. Press and hold the LEARN button (41) until the ON button is lit in red (not blinking).
2. Please take the TV remote control then press and hold the button you want to learn (example Vol +) until the Zappiti remote's ON button flashes red (blinking).
You have to put the remotes in front of each other to learn the keys.
3. Take the Zappiti remote control and press the button (37-40) you want to assign to the programming (example Vol +).
4. Repeat steps 2 and 3 for the other buttons to be programmed.
5. To finish programming, quickly press the LEARN button (41).

 

Programming buttons using the new remote of the Zappiti Pro 4K HDR:


1. Press the SET button on the Zappiti remote control for 7 seconds. 
2. The POWER button on the Zappiti remote control turns RED.
3. Press the key of your remote to be programmed on the Zappiti remote control. 
4. The POWER button on the Zappiti remote blinks RED. 
5. On your remote control, press the button you want to record on the Zappiti remote. 
6. The POWER button on the Zappiti remote blinks rapidly and then freezes. The recording is confirmed. 
7. Repeat steps 3 through 6 if you want to save other buttons.
8. To finish and save, press the SET button on the Zappiti’s remote control. The POWER button will turn off  





Feedback and Knowledge Base